| |
 Digital Video Optical |
Digital Video Optical |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TDM Over IP |
|
|
|
|
Protocol Converter |
PDH Multiplexer |
SDH EOS MSAP
|
Network Switch |
G.SHDSL |
CWDM Products
Video Encoder/Decoder
|
CWDM Products |
Adapter |
Attenuator |
Coupler |
WDM MUX |
Optical Transceiver |
|
|
|
|
|
|
|
 |
| |
|
9 - 16 Channels
Digital Video Optical Transmitter & Receiver
With 8 Bi-directional
Audio & Data Channels, 4E1 and 100M Ethernet
Optional
|
|
| |
|
|
|
|
Typical Pair Application
 |
|
Overview
The Product is a Fibre optic The Product is a Fibre
optic digital multiplexer for transmitting 16 channel
high quality,
uncompressed digital video, 8 channels of bi-directional
data and audio, 4 E1 and one 100M Ethernet over
a single Fibre cable. The product may also be maintained
by our future product, FB-V1000NMS, a Network Management
System.
Applications for this product include CCTV, video
surveillance, homeland security, ITS and etc.
Features:
|
- Transports 16 channels of High
quality video over one optical Fibre cable
- Exceeds RS250C Medium Haul Specification
for DG, DP and SNR.
- 8MHz video bandwidth, Compatible
with NTSC, PAL and SECAM
- Uncompressed video, 8 Bit or
16Bit digital encoding/decoding
- Transmission of 8channels of
any directional audio
- Provides 8 channels of bi-dir
data compatible with RS232, RS422/RS485
- Supports 4 E1, G.703 standard
- One 10M/100M Ethernet compatible
with IEEE802.3
- Easy installation and adjustment
free
- Transmission up to 60KM
over one Fibre
Specifications
|
- Power:
220VAC/50Hz, standalone device
- Indicators:
Power, Optical Link Status
Video Signal, Audio status, Data traffic
E1 Alarm, Ethernet Link Status
- Video:
Format: PAL/NTSC/SECAM
Video Signal: 1Vp-p, 75ohm
Digitization: 8bits/10bits
Bandwidth: 8MHz
DG <1%
DP <1 degree
SNR >65dB
Connectors: 16 BNCs
- Audio
Channel: 1~8, Bi-dir
Audio Input: unbalanced, 600Ohms
Digitization: 16bit@48k
Frequency: 10Hz to 20KHz
SNR: >70dB
Connector: RJ45
|
- Data:
Channel: 1~8, Bi-dir
Data Rate: 0~~23.04Kbps/Ch
Format: RS-232/RS-422/RS-485
Connector: RJ45
- E1 support:
Bit rate: 2.048Mb
Line code: HDB3
Standard: ITU-T G.703
Connector: CC3(1.0/2.8)
line impedance: 75ohm
Jitter Performance: G.742 and G.823
- Ethernet:
Data Rate: 10/100Mbps auto detect
Standard: IEEE802.3
Connector: RJ45
Auto-negotiation with half/full duplex
- Environment:
Operating: -40oC~+70 oC
Storage: -40oC~+85 oC
Humidity: 0-95% Non-Condensing
- Physical Dimension:
435 x 237 x 44(mm), Standalone
|
|
Typical
Pair Application
Ordering
Information
| Fibre
Type |
Video
Transmitter |
Video
Receiver |
Range |
Notes |
Singlemode
(09/125um) |
F7-16VT-W012F |
F7-16VR-W012F |
40Km |
Video only
|
| F7-16VT-nATR-nDTR-W022F |
F7-16VR-nATR-nDTR-W022F |
20Km
|
|
| F7-16VT-nATR-nDTR-100M4E1-042F |
F7-16VR-nATR-nDTR-100M4E1-042F |
40Km |
Support 4 E1,100M Ethernet
|
| F7-16VT-nATR-nDTR-W042F |
F7-16VR-nATR-nDTR-W042F |
40Km |
|
| F7-16VT-nATR-nDTR-W062F |
F7-16VR-nATR-nDTR-W062F |
60Km |
|
| CWDM |
F7-16VT-WllllrrF2 |
F7-16VR-WllllrrF |
rrKm |
Video only
|
| F7-16VT-nATR-nDTR-WllllrrF3 |
F7-16VR-nATR-nDTR-WllllrrF |
rrKm |
|
Explain: |
- Replace n within 1 through 8
for audio and data channel numbers
- Replace llll with CWDM wavelength,
replace rr with requested distance
- Add -M at the end of model number
for rack card product
- FC connectors standard, consult
factory for other connectors.
|
|
| |
|
