| |
 Digital Video Optical |
Digital Video Optical |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TDM Over IP |
|
|
|
|
Protocol Converter |
PDH Multiplexer |
SDH EOS MSAP
|
Network Switch |
G.SHDSL |
CWDM Products
Video Encoder/Decoder
|
CWDM Products |
Adapter |
Attenuator |
Coupler |
WDM MUX |
Optical Transceiver |
|
|
|
|
|
|
|
 |
| |
|
1 - 2 Channel
Digital Video Optical Transmitter & Receiver
With Bi-directional Audio,
Data, 4E1 and 100M Ethernet Optional
|
|
| |
|
|
|
|
Typical Application
 |
|
Overview
The Product is a Fibre optic
digital multiplexer for transmitting 2 channels
of high quality, uncompressed digital video, 1~2
ch annels
of bi-directional data and audio, 4 E1 and one 100M
Ethernet over a single Fibre cable. The product
may also be maintained by our future product, FB-V1000NMS,
a Network Management System. Applications for this
product include CCTV, video surveillance, homeland
security, ITS and etc.
Features
|
- Transports 1~2 channels of High
quality video over one optical Fibre cable
- Exceeds RS250C Medium Haul Specification
for DG, DP and SNR.
- 8MHz video bandwidth, Compatible
with NTSC, PAL and SECAM
- Uncompressed video, 8 Bit or
10Bit digital encoding/decoding
- Transmission of 2 bi-directional
audio
- Provides 2 channels of bi-dir
data compatible with RS232, RS422/RS485
- Supports 4 E1, G.703 standard
- One 10M/100M Ethernet compatible
with IEEE802.3
- Easy installation and adjustment
free
- Transmission up to 60KM over
one Fibre
- Stand alone operation or mount
in Model FB-CHS(FC-712-6) chassis
Specifications
|
- Power:
220VAC/50Hz, standalone device
0.5A@12VDC for 1 slot rack card
- Indicators:
Power, Optical Link Status
Video Signal, Audio status, Data traffic
E1 Alarm, Ethernet Link Status
- Video:
Format: PAL/NTSC/SECAM
Video Signal: 1Vp-p, 75ohm
Digitization: 8bits/10bits
Bandwidth: 8MHz
DG <1%
DP <1degree
SNR >65dB
Connectors: 2 BNCs
- Audio:
Channel: 1~2, Bi-dir
Audio Input: unbalanced, 600Ohms
Digitization: 16bit@48k
Frequency: 10Hz to 20KHz
SNR: >70dB
Connector: RJ45
|
- Data:
Channel: 1~2, Bi-dir
Data Rate: 0~~23.04Kbps/channel
Format: RS-232/RS-422/RS-485
Connector: RJ45
- E1 support:
Bit rate: 2.048Mb
Line code: HDB3
Standard: ITU-T G.703
Connector: CC3(1.0/2.8)
line impedance: 75ohm
Jitter Performance: G.742 and G.823
- Ethernet:
Data Rate: 10/100Mbps auto detect
Standard: IEEE802.3
Connector: RJ45
Auto-negotiation with half/full duplex
- Physical Dimensions:
176mmX220mmX25.4mm, card
162mmX237mmX36mm, standalone
- Environment:
Operating: -40oC~+70 oC
Storage: -40oC~+85 oC
Humidity: 0-95% Non-Condensing
|
|
Typical
Application
Order Information
| Fibre
Type |
Video
Transmitter |
Video
Receiver |
Range |
Comment |
Single
Mode
(09/125um) |
F7-2VT
-012F |
F7-2VR
-012F |
10Km |
video only
|
| F7-2VT-nATR-nDTR-022F |
F7-2VR-nATR-nDTR-022F |
20Km
|
|
| F7-2VT-nATR-nDTR-042F |
F7-2VR-nATR-nDTR-042F |
40Km |
video only
|
| F7-2VT-nATR-nDTR-100M4E1-042F |
F7-2VR-nATR-nDTR-100M4E1-042F |
40Km |
support 4E1, 10/100Mbps
|
| F7-2VT-nATR-nDTR-062F |
F7-2VR-nATR-nDTR-062F |
60Km |
|
| CWDM |
F7-2VT-WllllrrF2 |
F7-2VR-WllllrrF |
rrmKm |
video only
|
| F7-2VT-nATR-nDTR-WllllrrF |
F7-2VR-nATR-nDTR-WllllrrF |
rrKm |
|
Note: |
- Replace n with 1 or 2 for audio
and data channel numbers
- Replace llll with CWDM wavelengh,
replace rr with requested distance
- Add -M at the end of model number
for rack card product
- FC connectors standard, consult
factory for other connectors.
|
|
| |
|
