|
|
 |
| |
10/100Mbps Unmanaged Media Converter |
|
Single
Mode/MultiMode, Single-Strand/Double-Strand,
ST/PC, SC/PC, FC/PC Optional, Up to 120Km Distance
|
|
| |
|
|
|
|
Application
 
|
|
 |
1.Overview
Fibridge FB-10/100MMC Series Ethernet Media Converter translates transmission signals from a twisted-pair 10/100Base-TX cable to 100/1000Base-FX fiber optic cable. It has SNMP based intelligent network management, by that user can monitor and configure the copper port and optical port of center chassis and remote standalone easily. Besides, user can control the bandwidth rate limiting as N*32Kbps. The management system enables network managers and network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime.
2.Features
Fully compatible with IEEE802.3?IEEE802.3u standards
Up to 120km distance on single mode optical port
Up to 1916 bytes package forwarded
Optical port support Dual-strand, single-strand and CWDM etc.
Ethernet copper port supports 10/100Mbps speed and half/full duplex mode Auto-negotiate
Ethernet copper port supports MDI/MDI-X auto sensing
The Number of Ethernet copper ports can extend to 4ports
Backup optical ports optional
IEEE802.3af PoE (for PD) optional
lStandalones and Chassis Modules Optional, Chassis support cascade link up to 4 numbers for management
3.Software Features
Support Console, WEB and SNMP management
View & configure the working status of local chassis and remote standalone device, including connection status, speed, half/full duplex mode, port status
Set the speed limitation from 0Mbps to 70Mbps by step of 32Kbps
Support remote loop back function
Support online firmware upgraded
4.Specifications
4.1 Ethernet Copper Port:
Data rate: 10/100Mbps;
Auto-negotiate on Full/Half duplex topology;
Connectors: RJ-45 Connector;
Auto MDI/MDI-X
4.2 Optical Port:
Support 100Base-FX
Connectors: SC/ST/FC single mode or Multimode
Single Strand and Double Strand fiber port optional
Single-mode wavelength: 1310nm and 1550nm;
Multimode wavelength: 850nm and 1310nm;
Transfer Distance: up to 120Km.
4.3 Device Size:
Standalone : 95mm´70mm´26mm
Chassis : 19inchx250mmx125mm
4.4 Power:
Voltage: 5VDC
Power Consumption: <3 Watts
4.5 Environment:
Temperature: 0ºC ~ +50ºC (normal realization);
Temperature: -30ºC ~ +60 ºC (special realization, marked „S”)
Humidity: 30% ~ 90% (25 ºC);
5.Application
5.Ordering Information
Model:
FB-10/100MMC Media Converter
For detailed product information, please see the Part Number
Part Number:
F1-M32CA :multimode,1310nm,SC,standalone,220VAC power supply
F1-M31CD :multimode,850nm,SC,standalone, -48VDC power supply
F1-S3042CA : Single mode, 40km,1310nm,SC, standalone, 220VAC power supply
F1-S3082CA : Single mode,80km,1310nm,SC, standalone,220VAC power supply
F1-W3042CA Single mode,40km,1310nm,SC, standalone,220VAC power supply
F1-W3043CA : Single mode,40km,1550nm,SC, standalone,220VAC power supply
When an ";S" is shown at the end of the Part Number, it means the product is design to be used in areas with high temperatures
.
sales@fibridge.com.au |
|
4 x RJ45 with 2x Optical Port Media Converter Switch
|
|
 |
1.Overview
FBSWITCH1000 is high performance Ethernet Access equipment developed by Beijing Fibridge co., Ltd. The device could support four 10/100Mbps Ethernet copper ports and one 100Mbps fiber optic port, or five 10/100Mbps Ethernet copper port. With management software, it could realize functions including port status checking, port shutdown enable/disable, port bandwidth setting from 0 to 100Mbps, Log & alarm information management, etc. With inside management module, FBSWITCH1000 could support CONSOLE, WEB and SNMP management through RS232 port and RJ45 port. The inside power supply module make the device both compact and easy using.We can also provide Gigabit Ethernet Accesslink products.
2.Specifications
Four 10/100Mbps Ethernet Ports and one 100Mbps or Fiber port, or five 10/100Mbps Ethernet port
gigabit speed Ethernet ports also supplied
Support IEEE802.3, IEEE802.3u, IEEE802.3z protocols
Inside MAC Address list which store up to 1024 MAC addresses
Legal Maximum Packet size up to 1916 bytes
Ethernet ports support 10Mbps100Mbps or 10/100Mbps, half/full duplex auto-negotiation
Fiber optic port MM/SM, Single/double strand, FC/SC/ST physical connector selectable. MM transfer distance up to 5 Kms and SM transfer distance up to 100 Km
Support 62.5/125 and 50/125 micron multi-mode and 9/125 micron single-mode cabling
MDI/MDI-X auto-crossover on the Ethernet ports
Support IEEE802.1q tag-based VLAN and port-based VLAN
Support IEEE802.3x-based Ethernet Flow control
Support bi-directional bandwidth management
Each port could be used as uplink port
Inside management module, support three types of management: Console, Web and SNMP based GUI Software through RS232 and RJ45 ports
3.Order Information
Model Part Number (P/N)
F6-2114 10/100Mbps with four twist-pair ports and one fiber optic port, managed type
F6-2014 10/100Mbps with four twist-pair ports and one fiber optic port, unmanaged type
F6-21B4 10/100Mbps with four twist-pair ports and backup optic port, managed type
F6-20B4 10/100Mbps with four twist-pair ports and backup optic port, unmanaged type
F6-2105 10/100Mbps with five twist-pair ports, managed type
F6-2005 10/100Mbps with five twist-pair ports, unmanaged type
F6-G2114 10/100/1000Mbps with four twist-pair ports and one fiber optic port, managed type
F6-G2014 10/100/1000Mbps with four twist-pair ports and one fiber optic port, unmanaged type
F6-G21B4 10/100/1000Mbps with four twist-pair ports and backup optic port, managed type
F6-G20B4 10/100/1000Mbps with four twist-pair ports and backup optic port, unmanaged type |
|
| |
sales@fibridge.com.au
|
| |
|
4 x RJ45 10/100M with 1 Optical Port Media Converter Switch |
| |
|
 |
1.Overview
FBSWITCH1000 is high performance Ethernet Access equipment developed by Beijing Fibridge co., Ltd. The device could support four 10/100Mbps Ethernet copper ports and one 100Mbps fiber optic port, or five 10/100Mbps Ethernet copper port. With management software, it could realize functions including port status checking, port shutdown enable/disable, port bandwidth setting from 0 to 100Mbps, Log & alarm information management, etc. With inside management module, FBSWITCH1000 could support CONSOLE, WEB and SNMP management through RS232 port and RJ45 port. The inside power supply module make the device both compact and easy using.
We can also provide Gigabit Ethernet Accesslink products.
2.Features
Four 10/100Mbps Ethernet Ports and one 100Mbps or Fiber port, or five 10/100Mbps Ethernet port
gigabit speed Ethernet ports also supplied
Support IEEE802.3, IEEE802.3u, IEEE802.3z protocols
Inside MAC Address list which store up to 1024 MAC addresses
Legal Maximum Packet size up to 1916 bytes
Ethernet ports support 10Mbps?100Mbps or 10/100Mbps, half/full duplex auto-negotiation
Fiber optic port MM/SM, Single/double strand, FC/SC/ST physical connector selectable. MM transfer distance up to 5 Kms and SM transfer distance up to 100 Km
Support 62.5/125 and 50/125 micron multi-mode and 9/125 micron single-mode cabling
MDI/MDI-X auto-crossover on the Ethernet ports
Support IEEE802.1q tag-based VLAN and port-based VLAN
Support IEEE802.3x-based Ethernet Flow control
Support bi-directional bandwidth management
Each port could be used as uplink port
Inside management module, support three types of management: Console, Web and SNMP based GUI Software through RS232 and RJ45 ports
3.Interface Specification
3.1.Fiber Interface Specification (Only Available for F6-2014/F6-2114)
1)Adopt standard 1*9 pin optical transceiver module;
2)Wavelength: 850nm or 1310nm in multi-mode, and 1310nm or 1550nm in single-mode;
3)Up to 120km transmission distance in single-mode;
4)SC/ST/FC optical connectors are selectable.
3.2.Ethernet Port
1)Fully compatible with IEEE 802.3, IEEE802.3u and IEEE802.3x Standards
2)Link speed: 10/100Mbps auto-negotiation
3)Duplex mode: Half/full duplex auto-negotiation
4)Connectors:RJ45 Jack
5)Support automatic MDI/MDI-X crossover
4.General
4.1.Device Size
252mm (Width)×135mm (Depth)×36mm (Height)
4.2.Power
AC: 100 ~ 240VAC, 50/60Hz
DC: -48VDC
Power consumption: < 5W (with full load)
4.3.Environment
Working environment:
Temperature: 5? ~ 40?;
Humidity: 30% ~ 90% (25?);
Atmosphere pressure: 86 kPa ~ 106 kPa.
Store and transportation environment:
Temperature: -20? ~ 60?;
Humidity: 20% ~ 90% (25?);
Atmosphere pressure: 86 kPa ~ 106 kPa.
5.Order Information
Model:
FBSWITCH1000 5-port Ethernet Switch / Bandwidth Access
Part Number (P/N):
F6-2114 10/100Mbps with four twist-pair ports and one fiber optic port, managed type
F6-2014 10/100Mbps with four twist-pair ports and one fiber optic port, unmanaged type
F6-21B4 10/100Mbps with four twist-pair ports and backup optic port, managed type
F6-20B4 10/100Mbps with four twist-pair ports and backup optic port, unmanaged type
F6-2105 10/100Mbps with five twist-pair ports, managed type
F6-2005 10/100Mbps with five twist-pair ports, unmanaged type
F6-G2114 10/100/1000Mbps with four twist-pair ports and one fiber optic port, managed type
F6-G2014 10/100/1000Mbps with four twist-pair ports and one fiber optic port, unmanaged type
F6-G21B4 10/100/1000Mbps with four twist-pair ports and backup optic port, managed type
F6-G20B4 10/100/1000Mbps with four twist-pair ports and backup optic port, unmanaged type
|
| |
|
sales@fibridge.com.au |
|
10/100/1000M Media Converter |
| |
| |
1.Overview
FB-1000MMC Series Media Converter is a 10/100/1000Base-TX fast Ethernet media converter with the function of auto negotiation and auto MDI/MDIX cable selection. This device translates transmission signals from a twisted-pair 10Base-T, 100Base-TX or 1000Base-T cable to 1000Base-FX fiber optic cable. With intelligent SNMP-based network management, user can monitor and configure the Copper Port and Optical Port of center chassis and remote standalone easily, and helps network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime. Besides, user can control the bandwidth rate limiting.
2.Features
Fully compatible with IEEE802.3?IEEE802.3u standards
Up to 100km distance on single mode optical port
Up to 9278 bytes package forwarded, transmit 802.1Q VLAN TAG protocol transparently
Optical port support Dual-strand, single-strand and CWDM etc.
Ethernet copper port supports 10/100/1000Mbps speed and half/full duplex mode Auto-negotiate
Ethernet copper port supports MDI/MDI-X auto sensing
The Number of Ethernet copper ports can extend to 4ports
Backup optical ports optional, SFP device optional
IEEE802.3af PoE (for PD) optional
Standalones and Chassis Modules Optional, Chassis support cascade link up to 4 numbers for management
3.Software Features
Support Console, WEB and SNMP management
View & configure the working status of local chassis and remote standalone device, including connection status, speed, half/full duplex mode, port status
Support rate limit with step of 8Mbps in 1000Mbps speed, 0.8Mbps in 100Mbps speed, and 0.08Mbps in 10Mbps speed
Support remote loop back function
Support online firmware upgraded
4.Specification
4.1.Ethernet Port
Fully compatible with IEEE802.3?IEEE802.3u?IEEE802.3ab standards
Data Rate: 10/100/1000Mbps auto-negotiation (only 1000Mbps for 1000Mbps Device)
Half/full duplex mode auto-negotiation
Connectors: RJ45 Jack
Support automatic MDI/MDOI-X crossover
4.2.Fiber Optical Port
Adopt standard 1×9pin optical transceiver module;
Wavelength: 850nm, 1310nm on multi-mode, 1310nm,1550nm on single-mode;
Up to 80Km transmission distance on single-mode;
SC/PC, ST/PC and FC/PC are optional
4.3.Power
Power Input:
AC Power: 100V~242VAC, 50/60Hz
DC Power: -48VDC
Power Consumption:<3W
4.4.Environment
Operating
Temperature: 0~+50?
Relative Humidity: 0~90% (non-condensing)
Storage
Temperature: -25~+70?
Relative Humidity: 0~95% (non-condensing)
4.5.Dimensions
Standalone:
132mm(width)×36mm(height)×122mm(depth)
19-inch Chassis:
440mm(width)×125mm(height)×250mm(depth)
5.Order Information
6.1part number of module or standalone media converter
Note: X should be changed to 1 or 2. when X=1, it means unmanaged converter. When X=2, it means managed converter
P/N Description
FX-S4022CA Single mode, 1000M, Distance: 20Km, 1310nm, SC, Standalone, 220VAC
FX-S4022CD Single mode, 1000M, Distance: 20Km, 1310nm, SC, Standalone, -48VDC
FX-S7022TM Single mode, 10/100/1000M, Distance: 20Km, 1310nm, ST, Module
FX-S7022CM Single mode, 10/100/1000M, Distance: 20Km, 1310nm, SC, Module
FX-M41CD Multimode, 1000M, 850nm, ST, Standalone, -48VDC
FX-W4022CA Single Strand, 1000M, Distance: 20Km, 1310nm, SC, Standalone, 220VAC
FX-W7022CM Single Strand, 10/100/1000M, Distance: 20Km, 1310nm, SC, Module
5.2 Part Number(P/N) of Chassis
P/N Description
FC-216 16-slot chassis, support double redundant power supplies
FC-216-M Management Card of the chassis
6.3 Part Number(P/N) of Chassis power supply module
P/N Description
FP-2100A 16-slot chassis power supply module, AC 220V input, 100Watt output
FP-2100D 16-slot chassis power supply module, DC -48V input, 100Watt output
|
|
| |
|
|
1.Overview
FB-1000MMC Series Media Converter is a 10/100/1000Base-TX fast Ethernet media converter with the function of auto negotiation and auto MDI/MDIX cable selection. This device translates transmission signals from a twisted-pair 10Base-T, 100Base-TX or 1000Base-T cable to 1000Base-FX fiber optic cable. With intelligent SNMP-based network management, user can monitor and configure the Copper Port and Optical Port of center chassis and remote standalone easily, and helps network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime. Besides, user can control the bandwidth rate limiting.
2.Features
Fully compatible with IEEE802.3?IEEE802.3u standards
Up to 100km distance on single mode optical port
Up to 9278 bytes package forwarded, transmit 802.1Q VLAN TAG protocol transparently
Optical port support Dual-strand, single-strand and CWDM etc.
Ethernet copper port supports 10/100/1000Mbps speed and half/full duplex mode Auto-negotiate
Ethernet copper port supports MDI/MDI-X auto sensing
The Number of Ethernet copper ports can extend to 4ports
Backup optical ports optional, SFP device optional
IEEE802.3af PoE (for PD) optional
Standalones and Chassis Modules Optional, Chassis support cascade link up to 4 numbers for management
3.Software Features
Support Console, WEB and SNMP management
View & configure the working status of local chassis and remote standalone device, including connection status, speed, half/full duplex mode, port status
Support rate limit with step of 8Mbps in 1000Mbps speed, 0.8Mbps in 100Mbps speed, and 0.08Mbps in 10Mbps speed
Support remote loop back function
Support online firmware upgraded
4.Specification
4.1.Ethernet Port
Fully compatible with IEEE802.3?IEEE802.3u?IEEE802.3ab standards
Data Rate: 10/100/1000Mbps auto-negotiation (only 1000Mbps for 1000Mbps Device)
Half/full duplex mode auto-negotiation
Connectors: RJ45 Jack
Support automatic MDI/MDOI-X crossover
4.2.Fiber Optical Port
Adopt standard 1×9pin optical transceiver module;
Wavelength: 850nm, 1310nm on multi-mode, 1310nm,1550nm on single-mode;
Up to 80Km transmission distance on single-mode;
SC/PC, ST/PC and FC/PC are optional
4.3.Power
Power Input:
AC Power: 100V~242VAC, 50/60Hz
DC Power: -48VDC
Power Consumption:<3W
4.4.Environment
Operating:
Temperature: 0~+50?
Relative Humidity: 0~90% (non-condensing)
Storage:
Temperature: -25~+70?
Relative Humidity: 0~95% (non-condensing)
4.5.Dimensions
Standalone:
132mm(width)×36mm(height)×122mm(depth)
19-inch Chassis:
440mm(width)×125mm(height)×250mm(depth)
6.Order Information
6.1part number of module or standalone media converter
Note: X should be changed to 1 or 2. when X=1, it means unmanaged converter. When X=2, it means managed converter
P/N Description
FX-S4022CA Single mode, 1000M, Distance: 20Km, 1310nm, SC, Standalone, 220VAC
FX-S4022CD Single mode, 1000M, Distance: 20Km, 1310nm, SC, Standalone, -48VDC
FX-S7022TM Single mode, 10/100/1000M, Distance: 20Km, 1310nm, ST, Module
FX-S7022CM Single mode, 10/100/1000M, Distance: 20Km, 1310nm, SC, Module
FX-M41CD Multimode, 1000M, 850nm, ST, Standalone, -48VDC
FX-W4022CA Single Strand, 1000M, Distance: 20Km, 1310nm, SC, Standalone, 220VAC
FX-W7022CM Single Strand, 10/100/1000M, Distance: 20Km, 1310nm, SC, Module
6.2 Part Number(P/N) of Chassis
P/N Description
FC-216 16-slot chassis, support double redundant power supplies
FC-216-M Management Card of the chassis
6.3 Part Number(P/N) of Chassis power supply module
P/N Description
FP-2100A 16-slot chassis power supply module, AC 220V input, 100Watt output
FP-2100D 16-slot chassis power supply module, DC -48V input, 100Watt output
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
| |
|
