Features

• Transmitting unframed E1 signal through IP network
• E1 Number: 1 to 4 channels optional
• Ethernet port: 2 numbers, one for downlink, the other for uplink
• High transmitting speed, low transmitting delay time
• Clock Selectable: internal clock, external clock, network adaptable clock or recovered from E1 line
• Network adaptable clock is stable, little jitter and float
• Can be configured into N X 64K, or can be adaptable to network wide band N X 64K
• E1 information transmitted on the IP network has QOS guarantee
• Convenient to use, no complicated configuration
• Transmitted package based on the IP address, through switches, routers network equipment etc
• General UTP Ethernet interface, 10M/100M auto-negotiation

Specification

• Power
  Power consumption: < =4W
  AC power: 160-240v
  DC power: -48V
• Ethernet
  Physical port: RJ-45
  Port rate: 10/100Mbps
  Full/half duplex
  Compatible with IEEE802.3
• E1
  Physical port: BNC coaxial jack
  Input rate range: 2.048Mbps+-50ppm
  Port code: HDB3
  Impedance: 75ohm unbalanced
  Compatible with: G.703
• Environment
  Operating Temperature: 0~50oC
  Operating Relative Humidity: 20~90%
  Store Temperature: -20~65oC
  Store Relative Humidity: 10~95%
• Size
  270mm(W)*40mm(H)*105mm(D)
• LED
  UPLINK, DLINK, RUN1, RUN2, LOS1, LOS2, 10/100M, FDX, SYS, PWR
  

Order Information
F5-2315A 1E1 over 1 Ethernet pot, Standalone, AC220V power supply
F5-2315D 1E1 over 1 Ethernet pot, Standalone, DC-48V power supply
F5-2325A 2E1 over 1 Ethernet pot, Standalone, AC220V power supply
F5-2325D 2E1 over 1 Ethernet pot, Standalone, DC-48V power supply                                                      F5-2345A 4E1 over 1 Ethernet pot, Standalone, AC220V power supply                                                     F5-2345D 4E1 over 1 Ethernet pot, Standalone, DC-48V power supply                                                      F5-1345   4E1, 1 Uplink Ethernet port, 220VAC and -48VDC 1+1 hot-redundant power supply