Overview
4E1 PDH Multiplexer can multiplex 4E1 and 2-ports Ethernet (10/100Mbps line speed) signals in one Fibre channel to transmit. It is suitable for low capacity, point-to-point application of remote transmission. The circuit part of the equipment is fully digitized. The whole equipment is reliable, stable, easy to install and maintain. It has good temperature and voltage characteristics, complete alarm functions, one RS232 asynchronous interface and remote loop back functions(from software). At the same time, it can be managed from management software Fi-View-MP.

Features

• Providing up to 4 E1 channels and 2 optional 10/100Mbps Ethernet channel
• Fibre port bit rate: 150Mbps, up to 120Km distance without repeater
• E1 Line code: HDB3, compliant to G.703, G.823 and G.742.
• E1 channel support both 75ohm & 120ohm impedance
• Ethernet port support 10/100Mbps auto-detection, Full/Half Duplex auto-negotiation
• Ethernet port can transimit VLAN tag
• Complete alarm functions
• Providing an RS232 asynchronous interface
• Supporting the local/remote E1 loop back
• Remote loop back provided by software and hardware
• Providing RS232 port for management, GUI interface
• Standalone,220VAC or -48VDC power supply optional

Specifications

• Optical Port
  Port number: 1
  Bit rate: 150Mb/s+/-50ppm
  Wavelength: 1310nm, 1550nm
  Distance: 0 - 120Km
  Connector: FC/PC
• E1 Port
  Port number: 4
  Bit rate: 2.048Mbps(+/-100ppm)
  Impedance: 75ohm and 120ohm
  Line Code: HDB3, compliance with ITU-T G.703
• Ethernet Port
  Port nunber: 2, optional
  Speed: 10/100Mbps line speed
  Duplex: Half/Full auto-negotiate
  Frame Size: 64 - 1536 bytes
  MAC address: 1k
  MAC aging time: 5mins
• Power Supply
  Input voltage: When -48V, -40V ~ -60V (DC) is allowed
  When ~220V, -175V , ~264V (AC) is allowed.
  Overall power : 5W
• Operating Environment
  Temperature: 0oC --45oC
  Humidity: 95%, no condense
• Standalone Size
  483mm(L)*44.45mm(W)*200mm(H)
  Weight: 2kg